Paul A. Romsky Jr. - Spacecraft
The following links are screen shots of some Spacecraft GUIs that I am developing.
1965 Apollo Display Keyboard (DSKY) GUI screenshot
1965 Apollo Flight Director Attitude Indicator (FDAI) GUI screenshot
1965 Apollo Entry Monitoring System (EMS) GUI screenshot
1965 Apollo Launch Vehicle Engine Monitor (LVEM) GUI screenshot
1965 Apollo Event Timer (ETR) GUI screenshot
1982 Soyuz Digital Mission Clock GUI screenshot
Brief Video of the GUIs in Action
My GUI software is free but it is copyrighted and users are not authorized to distribute any of these GUIs including the GUI Installer zip files to others.
All GUIs were updated on 2023/06/14 11:48:00 EDT
Previous versions are obsolete.
If you have downloaded and installed any GUIs before this date, you will need to download and install them again for the updates.
These GUIs are under development, so check this webpage about once a week to see if you need an update.
Once the GUIs have finished development, this will be indicated on this page.
Download the Apollo DSKY GUI Installation Zip File
Download the Apollo FDAI GUI Installation Zip File
Download the Apollo EMS GUI Installation Zip File
Download the Apollo LVEM GUI Installation Zip File
Download the Apollo ETR GUI Installation Zip File
Download the Soyuz Digital Mission Clock GUI Installation Zip File
Other GUI Installation zip files will be posted in the near future.
After downloading the Zip file, perform the following installation procedure:
Note: The Apollo DSKY GUI installation procedure is shown below, the other GUIs have the same procedure but with their respective file names.
1. Move the 'Apollo_DSKY_GUI.zip' file to the PC Desktop.
2. Unzip the 'Apollo_DSKY_GUI.zip' file using any Zip Application.
Use the Zip 'Extract to here' option. A new folder called 'cvidiskit.Apollo_DSKY_GUI' will be created.
3. Traverse down the 'cvidiskit.Apollo_DSKY_GUI' folder to the 'setup.exe' file.
4. Double Left Click on 'setup.exe' to launch the 'Apollo DSKY GUI' Installer.
5. Left Click on 'Next' in each window in the 'Apollo DSKY GUI' Installer.
6. The GUI may take up to 5 minutes to install.
7. When the installation is complete, Left click on 'Finish'. You may be asked to reboot the PC. Do so only if instructed.
Note: You may now delete the 'Apollo_DSK_GUI.zip' and 'cvidiskit.Apollo_DSKY_GUI' files from the desktop, or move them to another area for future reference.
8. The GUI will have been installed to the 'C:\program files' or 'C:\program files (x86)' folder on the PC.
Traverse to the appropriate folder and open the README.txt file and then continue with step 11 to complete the installation.
Home